The server room or datacenter is considered the most important center of each unit because inside the room is the equipment in the data center such as switchboard system, server system, switch, … are all devices expensive and need to be protected, they need stable operation 24/7/365. These devices are more modern and faster, and more heat is generated. If this amount of heat is too high will cause the machine that no one expected, such as component failure, overload … So it is necessary to have immediate solutions to reduce the heat to the maximum. To ensure stable operation of the system. Air conditioning system for server room was born to solve this problem and also save electricity power use.
Choice of air conditioning equipment for server room
The system operates continuously for 24 hours a day, even if we do not use the computer equipment of that system. Therefore, the air conditioning system will need to be able to operate in a stable, durable and long life.
At the same time, due to the characteristics of the equipment in the room should combine the function of desiccation and dust dirt in the air.
In addition, due to continuous operation, the air conditioning system will use a lot of power to increase the operating costs of the server room. To save the most money on power, we need to choose the right system for power saving. One of the ways to measure equipment performance over other products and to make choices based on the EER index, however, is that this is only accurate when comparing equipment of the same type. consumption. As a result, the higher the EER consumes less energy.
Advantages of the system
Continuous operation 24/7/365
Data centers must work 24 hours a day, so the amount of heat that is generated is constant and huge (because of the huge amount of data to be processed) and needs to be cooled regularly to work correctly and increase. longevity Accurate air-conditioning is designed to ensure optimum cooling of equipment, ensuring optimum performance, lower power factor over time.
Standard temperature control
The larger the data center, the healthier it is, the greater the heat output, which can be as much as 6-10 times room temperature, so the precision air conditioning system needs to maintain a stable room temperature, usually from 22 ° C ± 0.5 ° C. On the other hand, precision control quickly detects temperature changes and adjusts to the initial stable temperature.
Keep moisture stable
Data centers need to maintain stable humidity, which is just as important as maintaining a stable temperature for the device to function normally. When the humidity is too high, water vapor may condense and corrode the device or cause a short circuit. Low humidity can cause static electricity storage and will damage the equipment.
Air flow control
The flow of air in the data center room is also important, especially in high-density and high-density servers, where the required air flow will be much higher. This is to ensure that the coolant gases reach all the servers.
In case you do not provide adequate airflow, hot spots and uneven temperature changes can occur in each area, leading to damage and reduced equipment life.
Air filter
Precise precision is designed with the ability to purify air at very high levels, filtering up to 99% dust particles over 5 micrometers in size, from 0.5-5 micrometers to 80%.
Deep cooling
The conventional air conditioners will cool the air and dehumidify the air, but the air conditioner will cool the air and control the humidity in the air, so the same capacity (the actual power + power consumption), the air-conditioning is more accurate than the normal machine.
Normal air conditioners use 50% of energy for cooling, 50% of energy for dehumidification; Accurate refrigerators use only 5% of energy to dehumidify and 95% of energy to cool => higher efficiency.
Precision control system is used in server room, datacenter, high density data center.
When put into use, Server becomes the blood vessels of the company. Therefore, this will be a valuable part and should be protected most carefully. Therefore, the selection of a company capable of designing and installing installation packages with experience and prestige for many years in the profession will give customers services with good quality and peace of mind.
Nam Phu Thai with the company’s design and engineering team can give customers a server room cooling system design that best suits the customer requirements.